|
|
|
|
|
|
RVTV Local
Listings
![]()
A-Channel
Barrie, London Pembroke, Windsor Sundays at 4:00 p.m.
City TV Winnipeg Sundays @ 3:00 p.m.
CITY TV Calgary Sundays @ 11:00 a.m.
CITY TV Edmonton Sundays @ 11:00 a.m.
A-Channel Victoria Sundays @ 1:00 p.m.
Saturdays at 10:00 am ET starting May 5 - August 25
repeating on Wednesdays at 4:30 pm ET starting May 9 - August
29th. |
|
| |
| |
|
| |
RV Roof Care & Maintenance
By: Mark J. Polk
One of the most neglected areas on your RV is the roof, out of site out of mind. The problem is if you don’t keep the roof clean and inspect the roof seams on a regular basis you’re could end up with water damage. Most RVs built today use a rubber roofing material. If you want to get a long life out of your RV roof here are some things you can do.
Safety first, be extremely careful whenever you are working on your RV roof. You can be seriously injured from a fall). You have to get on the roof of your RV to properly clean and inspect it for any damage or potential water leaks. The first step is the ladder you use to get up on the roof. If your RV does not have a ladder on the back to access the roof it probably is not designed to be walked on. In this situation it may be necessary to use a couple pieces of plywood or particle board to help distribute your weight. Many RV manufacturers have an option called roof rack and ladder ready. If the RV dealer orders this option the roof is built with a heavier roof decking. Even so you need to walk lightly when you’re on the roof.
Rubber roofing on an RV is a great product, but like everything else without routine preventive maintenance it will not last as long as it should. First of all there are different types of rubber roofs. Different manufacturers provide different instructions with their product. What we want to concentrate on today is what applies to all rubber roofs used on RVs. (There are other types of RV roofing material used like fiberglass, aluminum and vinyl. READ your roof manufacturers instructions for proper cleaning and sealing techniques to prevent damage to your roof and possibly void your warranty).
Rubber roofs should be cleaned three to four times a year and depending on where you park or store your RV it may need to be cleaned more often. Regardless of the type of rubber roof you have (NEVER use any cleaners or conditioners that contain petroleum solvents, harsh abrasives, or citrus ingredients). These types of cleaners can cause permanent damage to any rubber or vinyl surface. Most manufacturers of rubber roofs recommend you use a medium bristle brush and a non-abrasive cleaner. For light cleaning you can use warm water and a mild detergent like Dawn dish washing liquid. To clean, condition and protect the roof I use B.E.S.T Rubber Roof cleaner and protectant. Hard to clean areas like stubborn stains caused by leaves, sap, mold or mildew may require a second treatment. Use caution to prevent the cleaners from getting on the sides of the RV. (ALWAYS rinse the sides, front and back of your RV before rinsing the roof to prevent streaking or damage to the finish on your RV).
Cleaning the roof is only part of maintaining it. Every time you clean the roof you need to inspect the sealants around all of the openings and the seams on the roof. Water will take the path of least resistance and if there is the smallest opening it will find it. You need to thoroughly inspect the roof sealants for potential leaks and reseal any areas of the roof seams and around openings where you suspect a leak. Check with your RV dealer for sealants that are compatible with your roofing material.
I recently discovered a product called Eternabond that you only need to use one time and the area you’re sealing is sealed forever. You can use it to permanently seal all the seams on your roof and it’s great for repairing any damaged area like a rip or tear in the roof. Eternabond works on any type of RV roofing material and it’s as easy to apply as a piece of tape. Were going to use the Eternabond one-step miracle RV roof tape, designed just for RVs, to repair a tear in the rubber roof permanently seal a roof seam. The first step is to make sure the surface you are going to repair or seal is clean and dry. Now you remove approximately 12 inches of the release liner and apply the one-step miracle RV tape over the tear or seam you are repairing. Once it is installed go over it again rubbing the tape into place using moderate pressure. That’s all there is to it, you will never have to check it or worry about it again.
Happy Camping,
Mark
Mark Polk is the owner of RV Education 101. RV Education 101
is a North Carolina based company that produces professional
training videos, DVDs and e-books on how to use and maintain
your RV. Our goal is to make all of your RVing experiences safe,
fun and stress free.
www.rveducation101.com
|
|
|
 |
|
 |
|
